MOD KTM 990/950 Adv. & 950 SE Top Rack Info

Top Rack Legend

 

There’s a lot going on here so this will simplify things.

 

1. 990/950 Adv. Mounting– red

 

2. 950 SE Mounting– green

 

3. Rotopax top mounting holes– burgundy

 

4. Rotopax L bracket top mounting holes– yellow

 

5. SW-Motech Trax Top Box mounting holes– blue

 

6. Givi/Kappa Monokey Top Box mounting holes– orange

 

7. KISS Top Box Square Mounting holes–  purple

Rotopax mounting

Rotopax Top Direct Mount. A Kolpin Mount and Fuel Pack Jr. can also fitted to the top of the rack. 

 

Top L bracket; Rotopax can be run either fore or aft of the bracket.

 

Maximum weight capacity for the Top Rack is 12kg. (26lbs.)

Givi/Kappa and KISS top box mounting

 

Givi; A stock Givi Monokey mount kit and top box can be used. Washers and longer bolts may be needed. The latch block can be adjusted fore and aft in the slot and will require larger washers to mount securely. Rubber bumpers may also be added to prevent some top boxes from rattling.

 

KISS (DIY); (not shown) All that’s needed is the appropriate length ¼”carriage bolts, nuts (or plastic hand nuts) and washers. The bolts mount from underneath the Top Rack making this a 100% secure.  Use the Top Rack as a template and the forward edge of the Top Rack as a limit and drill two holes in any Pelican type or metal box. “Measure twice, drill once”!

 

 

© 2011 Motorcycle Overland Development 

 

Shown on F800 GS Top Rack proto

Givi E36 Box shown mounted on MOD F800 GS Top Rack.

SW-Motech - Trax Top Box mounting

Three extra washers are required to add approximately 3.3mm to the height of the front mounts only.  Two washers required for the rear centre mount for proper tightening with the slot.